Reverse Osmosis Equipment Model LFRO-40 Applied In Wind Power Plant

Introduction

Xinxiang Lifeierte Filter Corp., Ltd., a leader in filtration technology, presents the LFRO-40 Reverse Osmosis (RO) System, engineered to deliver high-purity water solutions for industrial and commercial applications. Designed with precision and durability, the LFRO-40 excels in environments demanding rigorous water quality control, such as wind power plants, food processing, and pharmaceutical manufacturing. With a robust flow rate of 40 m³/hr and advanced automation, this system ensures operational efficiency, cost-effectiveness, and compliance with international standards.


Technical Parameters

The LFRO-40 is equipped with state-of-the-art components to guarantee optimal performance. Below are its key technical specifications:

ParameterSpecification
ModelLFRO-40
Flow Rate (m³/hr)40
Raw Water PumpCMF85-20 (15KW)
Sand Filter Size (mm)2600*3450
Carbon Filter Size (mm)2600*3450
Anti-scale Dosing System500L
Security Filter52*40’’
High-Pressure PumpCDM85-50 (37KW)
RO Membrane Configuration40*8040 membranes
Pipe Material (Standard)UPVC
Optional Pipe MaterialStainless Steel (upon request)

Working Principle

The LFRO-40 operates through a multi-stage purification process to remove up to 99% of dissolved solids, bacteria, and organic contaminants:

  1. Pretreatment
    • Raw Water Tank: Stores untreated water for continuous supply.
    • Quartz Sand Filter: Removes suspended particles and sediments via layered filtration media.
    • Activated Carbon Filter: Adsorbs chlorine, odors, and organic impurities.
    • Anti-scale Dosing System: Injects scale inhibitors to prevent membrane fouling.
    • Security Filter: A 5-micron precision filter safeguards the RO membranes from microparticles.
  2. High-Pressure Filtration
    • 37KW high-pressure pump drives pretreated water through 40 spiral-wound 8040 RO membranes. Under pressures up to 225 PSI, water molecules permeate through the semi-permeable membranes, leaving contaminants in the concentrate stream.
  3. Post-Treatment
    • Purified water is stored in a sanitized tank, while concentrated brine is safely discharged.

Performance & Advantages

  1. High Efficiency: Achieves 40 m³/hr output with a recovery rate of 50–75%, minimizing water waste.
  2. Durable Construction: UPVC piping and stainless-steel options ensure corrosion resistance.
  3. Automated Control: Integrated sensors and PLC systems enable real-time monitoring of pressure, flow, and water quality (TDS < 1000 mg/L).
  4. Energy Savings: Optimized pump design reduces power consumption by 15% compared to conventional systems.
  5. Low Maintenance: Modular components and self-cleaning functions extend membrane lifespan to 2–3 years.

Product Structure

The LFRO-40 comprises the following core components:

  1. Raw Water Pump: Ensures consistent feedwater supply to pretreatment units.
  2. Multi-Media Filters: Quartz sand and activated carbon layers for coarse and fine filtration.
  3. High-Pressure Pump: Delivers the force required for RO membrane operation.
  4. RO Membrane Array: 40×8040 polyamide composite membranes for high salt rejection.
  5. Control Panel: Features touchscreen interfaces for pressure adjustment, system flushing, and fault diagnostics.
  6. Safety Mechanisms: Pressure relief valves, automatic shut-off, and leak detection systems.

Application in Wind Power Plants

In wind energy facilities, the LFRO-40 plays a critical role in maintaining turbine efficiency:

  • Cooling Water Treatment: Removes scaling ions (Ca²⁺, Mg²⁺) from cooling circuits to prevent corrosion and deposits.
  • Lubrication Systems: Supplies ultra-pure water for hydraulic fluids, reducing wear on turbine components.
  • Battery Storage: Produces deionized water for electrolyte preparation in energy storage systems.

Case Study: A wind farm in Inner Mongolia reduced downtime by 30% after installing the LFRO-40, thanks to its reliable removal of silica and iron contaminants.


RO Filtration Systems

Other Industry Applications

  1. Food & Beverage: Generates process water for brewing, bottling, and ingredient mixing (meets FDA/WHO standards).
  2. Pharmaceuticals: Provides USP-grade water for drug formulation and equipment sterilization.
  3. Desalination: Converts seawater into potable water for coastal communities.
  4. Electronics Manufacturing: Produces ultrapure water for semiconductor rinsing.

Conclusion

The LFRO-40 Reverse Osmosis System by Xinxiang Lifeierte Filter Corp., Ltd., is a testament to innovation in water purification technology. With its unmatched efficiency, robust design, and versatility across industries, it stands as a cornerstone for sustainable water management. Whether powering wind turbines or ensuring beverage safety, the LFRO-40 delivers purity, reliability, and long-term value.

Related products

Technical Parameter

ModelFlow rate
(m3/hr)
Raw water PumpSand filter size
(mm)
Carbon filter size
(mm)
Anti-scale dosing
system
Security filterHigh pressure
pump
RO system
LFRO-0.50.5BW2-4
(0.55KW)
250*1400250*140040L3*20’’BL2-11
(1.1KW)
2*RO membrane
4040
LFRO-11BJZ100
(0.75KW)
300*1400300*140040L5*20’’BL2-13
(1.5KW)
4*RO membrane
4040
LFRO-22BJZ150
(1KW)
400*1650400*165040L5*20’’BL4-12
(2.2KW)
8*RO membrane
4040
LFRO-33CMF4-60
(1.1KW)
500*1750500*175040L5*40’’BL4-14
(3KW)
12*RO membrane
4040
LFRO-44CMF8-25
(1.5KW)
600*1900600*190040L5*40’’CDL8-12
(4KW)
4*RO membrane
8040
LFRO-55CMF8-30
(1.85KW)
750*1900750*190060L7*40’’CDL8-14
(5.5KW)
5*RO membrane
8040
LFRO-66CMF8-30
(1.85KW)
900*1900900*190060L7*40’’CDL8-14
(5.5KW)
6*RO membrane
8040
LFRO-1010CMF16-30
(2.2KW)
1000*22001000*220060L10*40’’CDL16-12
(11KW)
10*RO membrane
8040
LFRO-1515CMF32-20
(4KW)
1200*23001200*2300100L15*40’’CDL32-80
(15KW)
15*RO membrane
8040
LFRO-2020CMF45-20
(7.5KW)
1500*24001500*2400100L20*40’’CDL42-50
(18.5KW)
20*RO membrane
8040
LFRO-2525CMF45-30
(11KW)
1800*26001800*2600150L25*40’’CDL42-60
(22KW)
25*RO membrane
8040
LFRO-3030CMF64-20
(11KW)
2200*34002200*3400200L42*40’’CDL64-50
(30KW)
30*RO membrane
8040
LFRO-4040CMF85-20
(15KW)
2600*34502600*3450500L52*40’’CDM85-50
(37KW)
40*RO membrane
8040
LFRO-5050CMF85-30
(18.5KW)
3000*45003000*4500500L65*40’’CDM85-60
(45KW)
50*RO membrane
8040
Scroll to Top