HFU620GF100H13 Water Treatment Filter Element Product Specification

Product Introduction

The HFU620GF100H13 is a high-performance folding-type water filter cartridge specifically engineered for industrial water treatment applications. Adopting premium glass fiber filter media and precision folding technology, this product integrates the advantages of large filtration area, high dirt-holding capacity and stable filtration performance. It is designed to meet the stringent purification requirements of various industrial water systems, effectively removing suspended solids, particulate impurities and colloidal substances from water, thus protecting downstream equipment and improving the overall water quality of the system.

Filtration Precision

The HFU620GF100H13 features a nominal filtration precision of 10 microns, which can reliably capture particulate matters with a particle size of 10 microns and above in the water flow. This precision level strikes a perfect balance between filtration efficiency and flux performance, ensuring thorough impurity removal while avoiding excessive blockage during operation.

Flux

Under the standard operating condition of 25℃ and 0.2MPa inlet pressure, the HFU620GF100H13 achieves a stable water flux of 80–100 L/min. Its folding structure expands the effective filtration area, enabling it to handle large-volume water flow efficiently without compromising filtration quality, making it suitable for high-flow industrial water treatment systems.

Salt Rejection Rate

As a particulate filtration cartridge, the HFU620GF100H13 is not designed for desalination purposes. Its salt rejection rate is less than 5%, which means it does not have the capability to remove dissolved salts and ions from water. This product focuses on the separation of physical particulate impurities rather than chemical desalination treatment.

Pressure Drop

The initial pressure drop of the HFU620GF100H13 is ≤0.03MPa under the rated flux condition. With the accumulation of impurities during operation, the pressure drop will gradually increase. When the pressure drop reaches 0.1MPa, it is recommended to perform maintenance or replacement to ensure the normal operation of the water treatment system.

Molecular Weight Cutoff (MWCO)

The molecular weight cutoff of the HFU620GF100H13 is 100,000 Dalton. This parameter indicates that the filter cartridge can effectively retain substances with a molecular weight of 100,000 Dalton and above, such as macromolecular colloids, organic polymers and large particulate organic matter in water, while allowing small molecular substances to pass through smoothly.

Membrane Thickness

The glass fiber filter membrane of the HFU620GF100H13 has a thickness of 0.3–0.4 mm. This moderate thickness ensures sufficient mechanical strength and dirt-holding capacity of the membrane, preventing membrane rupture under high-pressure operation and extending the service life of the filter cartridge.

Replacement Cycle

The recommended replacement cycle of the HFU620GF100H13 is 3–6 months, which is subject to the actual water quality and operating conditions of the application site. In water systems with high turbidity (suspended solids content >50mg/L), the replacement cycle should be shortened to 1–2 months to avoid excessive blockage and pressure loss caused by impurity accumulation.

Features

High-efficiency Filtration: Premium glass fiber media ensures high capture rate of 10-micron and above particulates, with filtration efficiency up to 99%.
Large Dirt-holding Capacity: Precision folding design expands the effective filtration area, significantly improving dirt-holding capacity and reducing replacement frequency.
Stable Performance: The filter cartridge has excellent chemical stability and can resist the erosion of weak acid, weak alkali and most organic solvents, suitable for complex water quality environments.
Easy Installation: Standard interface design is compatible with most industrial filter housings, simplifying installation and replacement procedures without additional modification.
Environmentally Friendly: The filter material meets the environmental protection standards, non-toxic and harmless, and can be recycled after professional treatment, reducing environmental pollution.

Application Fields

Industrial Process Water Treatment: Applied in the pretreatment of cooling water, boiler feed water and process water in industries such as electronics, metallurgy and chemical engineering to protect precision equipment.
Municipal Water Supply: Used in the advanced filtration of tap water to remove suspended solids and colloidal substances, improving the quality of domestic water.
Food and Beverage Industry: Applied in the filtration of raw water for beverage production, drinking water purification and process water treatment in food processing to meet food safety standards.
Pharmaceutical Industry: Used in the pretreatment of purified water and water for injection in pharmaceutical production, complying with GMP standards.
Reverse Osmosis System Pretreatment: Serves as the pre-filter of reverse osmosis (RO) systems, removing particulate impurities to prevent RO membrane scaling and clogging, extending the service life of RO membranes.

Conclusion

The HFU620GF100H13 water treatment filter element is a high-reliability particulate filtration product integrating high efficiency, large flux and long service life. Its precise design and stable performance make it an ideal choice for various industrial and municipal water treatment scenarios. Whether used in high-flow process water systems or precision water purification fields such as pharmaceuticals and electronics, it can provide consistent and reliable filtration effects, reduce the operation and maintenance costs of water treatment systems, and ensure the stable operation of downstream equipment.

Replacement HFU620GF100H13 High Flow Water Filter Cartridge for Industrial Water Treatment 10 Micron Microporous Folding Filter Element