The automated and continuous manufacturing process ensures that each cartridge has good and consistent performance specifications. The high temperature and vacuum manufacturing process minimizes potential manufacturing debris. Standardized lengths to accommodate most cartridge installations and customized cartridge lengths.
True density-graded capture of particles throughout the depth of the cartridge allows the cartridge to be fully effective, and higher dirt retention means long service life and low replacement frequency, resulting in cost savings.
Features:
Contains no wetting agents, solvents, antistatics or adhesives
Meets requirements for food and beverage contact
Long lifetime of the filter
Excellent dirt-holding capacity
Potable water filtration
Chemical filtration – broad chemical compatibility
Plating baths
Amine Filtration
Structure material
Filter Media: Polypropylene
End caps and adapters: polypropylene
Dimensions
Nominal outside diameter: 2.50 inches (6.4 cm)
Nominal inside diameter: 1 inch (2.5 cm)
Operating Limitations
Maximum differential pressure: 35 psi (2.4 bar) at =100°F (38°C)
Maximum temperature: 160°F (71°C) @15 psid (1.0 bar)
Maximum recommended water flow rate: 5 gpm (19 lpm) per 10 in. length
Related Products:
PP Melt-Blown Filter
Microporous Pleated Filter
Wire-Wound Filter
