High Flow Filter Housings
RO reverse osmosis pretreatment large flow filter element size specifications:
Outer diameter
152mm
Inner diameter
89mm
Length
1016mm
RO reverse osmosis pretreatment large flow filter element structure material:
Filter layer
microfiltration polypropylene (PP)
Support layer
polypropylene (PP)
End cap
glass fiber reinforced polypropylene
O-ring
EPDM, fluororubber
Introduction
RO reverse osmosis pretreatment high flow filter element greatly reduces investment costs compared with standard 2.5-inch filter elements in similar high flow filter element applications such as pre-filtration of reverse osmosis water treatment equipment.
The processing flow of each RO reverse osmosis pretreatment high flow filter element can reach 30T/h, so the number of filter elements used can be reduced and the filter housing size can be reduced.
The filter housing design can be used in each high flow filter element. Compared with general models, the filter allows larger filter elements and reduces investment and production costs. The horizontal design and centerless structure make it more convenient and quick to replace the filter element.
Performance Characteristics
- High filtration accuracy 1μm-80μm, uniform filter element pore size;
- Small filtration resistance, large flux, strong dirt interception ability, and long service life;
- High cleanliness of filter element material, no pollution to the filter medium;
- Resistant to acid, alkali and other chemical solvents;
- High strength, high temperature resistance, filter element is not easy to deform;
- Low price, low operating cost, easy to clean, and replaceable filter element.
Advantages
Stable operation
Simple structure
Reliable operation
Easy maintenance
Standard specifications
Widened and thickened rim of lid
The new clamp is more load-bearing
Automatic welding quality is stable
The weld seams are uniform and beautiful
Low noise, dustproof and waterproof
Technical Parameter
| Model | Inlet and outlet pipe | Specification | Thickness of body | Structure | Qty of filter element | Flow rate t/h | Filter area M2 | Material |
| LFD-1-1P | DN50 | ᵩ219X1600 | 2 | Clamp | 1 | 30 | 0.23 | Carton steel/Stainless steel304 |
| Movable flange | ||||||||
| LFD-2-2P | DN80 | ᵩ400X1700 | 3 | Flange | 2 | 60 | 1 | |
| LFD-2-3P | DN100 | ᵩ450X1750 | 3 | Flange | 3 | 90 | 1.5 | |
| LFD-2-4P | DN100 | ᵩ550X1550 | 3 | Flange+arm | 4 | 120 | 2 | |
| LFD-2-5P | DN125 | ᵩ650X1600 | 3 | Flange+arm | 5 | 150 | 2.5 | |
| LFD-2-6P | DN150 | ᵩ650X1600 | 3 | Flange+arm | 6 | 180 | 3 | |
| LFD-2-7P | DN200 | ᵩ700X1650 | 4 | Flange+arm | 7 | 210 | 3.5 | |
| LFD-2-8P | DN200 | ᵩ750X1700 | 4 | Flange+arm | 8 | 240 | 4 | |
| LFD-2-9P | DN200 | ᵩ800X1750 | 4 | Flange+arm | 9 | 270 | 4.5 | |
| LFD-2-10P | DN250 | ᵩ950X1750 | 5 | Flange+arm | 10 | 300 | 5 | |
| LFD-2-12P | DN250 | ᵩ1000X1750 | 5 | Flange+arm | 12 | 360 | 6 | |
| Note: 1. The above working pressure is less than 1.0MPa, the working temperature is 10-80℃, and the filter medium is non-toxic liquid. The shell wall thickness is stainless steel by default. | ||||||||
| 2. The tank body is PE high-flow folded filter element by default. | ||||||||
Application
Water treatment: RO pretreatment, seawater desalination, wastewater reuse.
Food and beverage: Juice clarification, wine filtration (alternative to pasteurization).
Petrochemical and pharmaceutical: Lubricating oil purification, liquid medicine precision filtration.
Power electronics: Power plant condensate, semiconductor ultrapure water system.
