OEM High Flow Water Filter Cartridge Fit Pall Parker 3M Pentair Housings
Our high flow water filter cartridges are engineered for high-volume industrial & commercial water filtration, delivering 15–500 GPM per cartridge (2–4x higher than standard filters) with low pressure drop and long service life. Compatible with Pall, Parker, 3M (Aqua-Pure), Pentair and equivalent replacement cartridges, these elements remove suspended solids, sediment, rust, algae, and scale for RO pre-treatment, desalination, power plants, food & beverage, pharmaceuticals, and municipal water systems.
Core specs: 1–100 micron ratings, FDA-compliant PP/PES media, 20”/40” lengths, single-open end with handle for tool-free installation. Ideal for high-flow applications where fewer cartridges, smaller housings, and lower maintenance costs are priorities.
Key Selling Points
Ultra-High Flow Capacity: Up to 500 GPM per cartridge; reduce cartridge count by 60% vs. standard filters → smaller housings, lower capital cost.
>99%+ Filtration Efficiency: Pleated media (PP/PES/PTFE) ensures consistent removal of 1–100 μm particles; protects downstream equipment (pumps, membranes, valves).
>Long Service Life & High Dirt Holding: Large filtration area (up to 1,200 sq ft) extends change intervals → less downtime, lower labor cost.
Low Pressure Drop (ΔP): Optimized pleat geometry reduces pump load → 15–30% energy savings.
Tool-Free Quick Change: Ergonomic handle design; no wrench needed → fast, safe replacement.
Broad Chemical Compatibility: Resists acids, bases, and sanitizers; operates at 40°F–180°F (4°C–82°C).
OEM & Replacement Options: Exact equivalents for Pall Ultipleat/Marksman, Parker Mega Flow, 3M 7000/740 Series, Pentair Aqualine.
Cost-Effective: Fewer cartridges, less maintenance, longer life → lower total cost of ownership (TCO).
1. Pall High Flow Cartridges
Ultipleat Series (HFU)
HFU620UY200H4 / HFU620UY400H4 (20/40 μm, 20”/40”)
HFU640UY200H4W / HFU640UY400HW (high capacity, 40”)
Marksman Series (PFT)
PFTMXS1-2UN-PFC (1–150 μm, Size 2 bag housing compatible)
PFT40H1-10UM (40” length, 10 μm, inside-out flow)
2. Parker High Flow Cartridges
Mega Flow Series
MF40-1-10 (40”, 1 μm, PP pleated)
MF40-5-20 (40”, 5 μm, high dirt holding)
MF20-10-50 (20”, 10 μm, cost-effective)
3. 3M (Aqua-Pure) High Flow Series
HF Series (Carbonless)
HF20-I (0.2 μm, 14,000 gal, 20” length)
HF25-MS (1 μm, 10,000 gal, 25” length)
HF40-S (0.2 μm, 25,000 gal, 40” length)
7000/740 Series
740B-01 (1 μm, 40”, radial pleat)
7000-05 (5 μm, 20”, high flow)
4. Pentair High Flow Cartridges
Aqualine Series
CCP420 (1 μm, 420 sq ft, 40”)
CCP520 (1 μm, 520 sq ft, 40”)
Pleatco Ultra Series
240 / 320 / 420 / 520 (20”/40”, 1–20 μm)
