Stop Frequent Monthly RO Cleaning: LF-BW-FR Reverse Osmosis Membrane For High COD Sewage Reuse

Stop Frequent Monthly RO Cleaning: LF-BW-FR Reverse Osmosis Membrane For High COD Sewage Reuse

Printing & dyeing wastewater, steel plant circulating water and municipal reclaimed water contain massive organic sludge, algae and biological mucus. Ordinary Reverse Osmosis membrane will be covered by thick biofilm within 1-2 months, causing pressure surge, reduced water output and mandatory shutdown cleaning every 30 days, bringing huge production pause loss and extra chemical cost. Our LF-BW-FR anti-fouling Reverse Osmosis membrane element adopts upgraded hydrophilic TFC coating and widened 34mil flow channel, greatly slowing pollutant adhesion on the membrane surface. This industrial-grade RO membrane filter can maintain stable salt rejection above 99.6 under long-term high-COD raw water, and must cooperate with large-flux PVDF Ultrafiltration membrane module to lower front pollution load before entering any RO membrane. All LF-BW-FR series RO membrane element and matched UF membrane can be fully viewed inside our water filter element.

 

LF-BW-FR Anti-Fouling Reverse Osmosis membrane element physical picture | LEFILER

 

Main Industrial Application Scenarios

1. Printing & dyeing factory wastewater zero discharge desalination equipment

2. Steel mill circulating cooling water advanced reuse stations

3. Municipal secondary sewage landscape water recycling projects

4. Landfill leachate secondary deep treatment lines

5. Petrochemical high organic wastewater recovery units

6. Electroplating heavy metal wastewater pretreatment systems

 

Anti-fouling Reverse Osmosis membrane with UF membrane wastewater flow diagram | LEFILER

 

Anti-Pollution Core Advantages Of BW-FR RO Membrane Filter

1. Super hydrophilic surface inhibits microbial and organic adhesion on Reverse Osmosis membrane surface

2. Wider internal channel reduces dirt stacking inside each Reverse Osmosis membrane element

3. Outstanding flux recovery after acid and alkali cyclic cleaning for this RO membrane filter

4. Wide cleaning pH tolerance range 1-13, adapt strong industrial detergent maintenance

5. Standard 4-inch & 8-inch universal size fits all mainstream FRP pressure vessels for RO membrane

6. PVDF Ultrafiltration membrane module double protection cuts cleaning frequency by over 60%

Full LF-BW-FR Reverse Osmosis Membrane Model List
LF-BW-4040FR, LF-BW-8040FR, LF-BW-8040FR-PRO, LF-BW-8040FR-440D

If you are interested in us or have any questions, please contact us.

Scroll to Top