Product Introduction
The HFU660UY060J is a large-diameter, pleated high-flow filter cartridge widely recognized in the industrial water treatment market. It is primarily designed as a high-performance, cost-effective direct replacement for original equipment manufacturer (OEM) cartridges from major brands like Pall. Its design is engineered to handle very high flow rates while protecting sensitive downstream equipment.
Filtration Precision
Standard Rating: The standard or nominal filtration precision for this cartridge is 5 micrometers (µm).
Customizable Range: The cartridge is also available in a customizable range from 1 to 40 µm. In specific applications, such as in power plants, it is used with a precision of ≤5 µm.
Flux
This model excels in high single-cartridge flow rates. It is designed to handle more than 250 gallons per minute (GPM), which is equivalent to approximately 950 liters per minute (LPM). Alternative specifications suggest a capacity of around 70 to 110 cubic meters per hour (m³/h) for standard lengths. Its purpose is to reduce the total number of filter housings required in a system.
Salt Rejection Rate
Not Applicable (N/A).
The HFU660UY060J is a mechanical depth filter designed to remove suspended solids and particles. It does not remove dissolved salts; for that, a membrane-based process like Reverse Osmosis (RO) is required. The cartridge’s main role is often to act as a pre-filter or “guard filter” for such RO systems. The other sources discussing salt rejection specifically refer to nanofiltration (NF) and other membrane technologies and are not applicable here.
Pressure Drop
Specific pressure drop data for this exact model is not detailed in the available specifications. However, it is a standard performance metric for such cartridges. The product can operate at a nominal pressure of 1.6 to 4 bar.
Molecular Weight Cutoff (MWCO)
Not Applicable (N/A).
MWCO is a parameter used exclusively for membrane technologies like Ultrafiltration (UF) and Nanofiltration (NF), which separate solutes at the molecular level. The HFU660UY060J operates on a micron-based, physical sieving principle for particles and therefore does not have an MWCO rating.
Membrane Thickness
Not Applicable (N/A).
This product is not a thin-film membrane. It is a pleated depth filter cartridge, and its separation layer is a thick, porous media. Therefore, “membrane thickness” is not a relevant parameter.
Replacement Cycle
There is no fixed time-based cycle. The service life depends entirely on the inlet water quality and contaminant load. Replacement is typically triggered when the differential pressure across the cartridge increases to a preset terminal value, indicating the filter media is saturated.
Features
High Flow in a Single Housing: Significantly reduces system footprint and the number of required vessels.
Pleated Design: Maximizes surface area for extended service life and high dirt-holding capacity.
Easy Installation: Features a manually installed O-ring for reliable, quick, and simple setup.
Material Options: The core filter media can be made from polypropylene (PP), glass fiber, stainless steel mesh, or paper pulp. Seals are typically made from Nitrile (NBR) rubber.
Wide Temperature Range: Can operate between -10°C to +100°C.
Robust Construction: Designed with sufficient strength to withstand hydraulic pressure without damage.
Application Fields
This cartridge is a versatile pre-filter used in numerous industries requiring high-volume particulate removal.
Reverse Osmosis (RO) Protection: Primary use as a pre-filter (“保安过滤”) for RO systems and seawater desalination pretreatment.
Power Generation: Specifically for condensate water filtration and applications like iron removal.
Process Industries: Filtration in petrochemical, chemical, and metallurgical operations.
Food & Beverage: Pre-filtration of water, juices, soft drinks, milk, edible oils, and syrups.
Biopharmaceutical: Filtration of process water, solvents, and raw medicinal liquids.
Conclusion
The HFU660UY060J is a high-performance, high-flow depth filter cartridge designed for industrial-scale water pretreatment. Its core value lies in providing reliable and efficient protection for downstream RO membranes and other sensitive equipment by removing suspended particles. It offers a cost-effective solution with long service life and significantly reduces system complexity for large-flow applications.
Related Products
This cartridge is part of a large family of high-flow filters. Related models from the same series or for similar applications include:
Other Filtration Ratings: Models like
HFU660UY020J(often 1µm) orHFU660UY100J(often 100µm).Similar “Pall-Compatible” Models: Models such as
HFU660UY060H,HFU660UY060HW, andHFU660UY060HB13, which share the same form factor and application but may differ in materials or sealing details.
