In order to achieve the best filtration effect, and at the same time to meet the user to save water, electricity, provincial artificial requirements, the technical engineer of LEFILTER’s by its professional knowledge, rich market experience, and rigorous scientific attitude, to make the best choice for you. When selecting the self-cleaning filter, consider the following factors:
1. Treatment water quantity;
2. Pipeline pressure of the system;
3. Filtering accuracy required by users;
4. Concentration of suspended matter in the filter impurities;
5. Physical and chemical properties of the filtration media;
6. Special-purpose self-cleaning filter.
Filters with various pressure ranges can be designed according to user requirements; after special processes, select nickel, titanium alloy and other special materials, and shall provide specific solutions according to the specific working conditions and requirements
When selecting the filter type, consider the following factors:
1. Treatment water quantity;
2. Pipeline pressure of the system;
3. Filtering accuracy required by users;
4. Concentration of suspended matter in the filter impurities;
5. Physical and chemical properties of the filtration media.
The first way to save industrial water is to vigorously develop and popularize the reuse technology and improve the reuse rate of water. The successfully developed self-cleaning filter can make the treated water source repeated and recycled.
Since cleaning filter is a kind of using filter directly intercept water impurities, remove water suspended matter, particles, reduce turbidity, purify water quality, reduce the dirt, algae, rust, etc, to purify water quality and other equipment protection system working precision equipment, water by the inlet into the cleaning filter body, due to the intelligent (PLC, PAC) design, the system can automatically identify the impurity deposition degree, to the valve signal automatically.
Since cleaning filter to overcome the traditional filter products pollution is small, easy to dirt blockage, filter part need to remove cleaning and unable to monitor the filter status, and many other shortcomings, with the raw water filter and automatic cleaning of filter function, and cleaning sewage system uninterrupted water supply, high degree of automation. Self-cleaning filter operation and control can automatically clean without any external energy filter, automatic sewage.
During the backwash, the cleaning filtration cycle can be adjusted. The default cleaning filtration time is 10-60 / s. The cleaning filtration water loss only occupies 0.001% -0.002% of the filtered water; the filtration accuracy can reach 2-200 micron; the working pressure can reach 0.15-1.00Mpa; the single flow is 4-600m / h. The operation practice shows that the effective treatment of the self-cleaning filter saves a lot of water for the industry, and also promotes the economic development.
Related Products
Microporous Pleated Filter
PP Melt-Blown Filter
Wire-Wound Filter
