PALL large flow water filter HFU640UY020J is widely used in medium and large, large and super large projects. Water desalination systems in the steel and power industries Wastewater and sewage reuse in the industrial field municipal water treatment use points. HFU640UY020J large flow water filter, special quality filter for power plant, to provide professional filtration solutions for power plants. pall large flow filter is installed in the security filter, also known as: folding filter, large flow filter, security filter filter, large area fold surface design can reduce lower pressure than other filter elements, and get longer service life.
Advantages:
1, the filter element size is large
2, large flow processing capacity
3, special imported filter material
4, fluid flow from inside to outside, effective interception of impurities
5, suitable for a variety of standard large flow filter
Performance characteristics:
General dimensions Outer diameter: 152.4mm Inner diameter: 89mm
Processing accuracy level: 1,3,5,10,20,40,70,90,150 microns (μm)
Change pressure difference and limit operating temperature: 50psid(3.4bard)@68°F(20°C), 35psid(2.4bard)@160°F(71°C)
Water flow speed: 20 “inch – 68 gpm/psid (257 lpm/70 mbar), 40” inch – 135gpm/psid (511 lpm/70 mbar), 60 “inch – 204 gpm/psid (772 lpm/70 mbar)
Production standard:
1. Filter material: polypropylene
2. Supporting material: polypropylene
3. End cover material: 10% glass fiber reinforced polypropylene
4. Inner frame material: polypropylene (only applicable to 60 inches /1524mm filter)
5. O-ring material: EPDM rubber
Size specification:
Filter length specification: 20 inches (508mm) 40 inches (1016mm) 60 inches (1524mm)
Filter outer diameter: Large Outer diameter: 6.3 inches (160mm) Outer diameter: 5.9 inches (150mm) Inner diameter: 3.5 inches (89mm)
Installation and use:
The convenient handle on the filter element makes the replacement of the filter element simple and convenient, can provide four kinds of filtration accuracy, respectively 0.5, 1, 5, 10 microns, to meet the requirements of different precision levels, the overall polypropylene design and hot melt bonding treatment, effectively prevent secondary pollution, comes with a framework, enhance the pressure resistance of the filter element during use, built-in O-ring, To ensure the tightness and reliability of the filter, the internal ABS strengthening ring increases the use of pressure.
Working pressure difference: 0.3 (MPa) Filtration accuracy: 1.5.10
Raw water pressure: 2.5 (KG/c㎡) Filter form: folding filter
Operating temperature: 85 (℃) Inlet and outlet diameter: 110MM (mm)
Material: pp Type: Initial effect
Use: water filtration
Properties: acid and alkali resistant
Application field:
Steel mill reverse osmosis protection pre-filtration;
Power plants, petrochemical and chemical reverse osmosis fine treatment pre-filtration;
Recycle water filtration, condensate water filtration, seawater desalination pre-filtration;
Reverse osmosis security filter element;
Water filtration and reverse osmosis filtration;
Acid and alkali liquid filtration, chemical raw materials and organic solvent filtration;
Industrial water, bath filtration;
Pre-filtration of sterile water;
