The Ultipleat High Flow filter elements are designed for high flow rates up to 113 m3/hour (500 US gal/min) in a single 1524 mm (60 inch) cartridge. They utilize Profile UP media with unique,laid-over pleat geometry. The Ultipleat High Flow element is a large diameter, single open ended, pleated cartridge with an inside to outside flow pattern and a core-free construction. The filter’s unique, laid-over pleat geometry, combined with its large diameter means fewer elements are required for a given flow rate than standard diameter cartridges. Filter vessels are correspondingly smaller,resulting in lower capital and installation costs, as well as reduced operating costs.
Description
Length:1016 mm (40”)
Rating (μm) at 99% Efficiency (ß-100):2μm
Filter Medium:Polypropylene
Support Mesh and Outer Wrap:Polypropylene
End Caps and Handle:Polypropylene (10% glass fiber reinforced)
O-ring Seal:Ethylene Propylene Rubbe
Ultipleat High Flow filter elements are designed for cost-effective, highly efficient particle filtration in high flow rate food and beverage applications.
Features
Fixed fiber matrix with no adhesives or surfactants
Pleated (laid-over pleat geometry) media in a large diameter cartridge format
Inside to outside flow configuration
Benefits
Consistent filtrate quality
Highly stable structure
Higher product yields
Process reliability
Lower capital and installation costs
Reduced installation footprint
30% lower operating costs
Longer service life
Over 10% water savings
Protects filtrate from
recontamination by trapping
particulates inside the cartridge
Related Products
Microporous Pleated Filter
PP Melt-Blown Filter
Wire-Wound Filter
